DOBNER - Metal Ceiling Systems

Dobner Aluminium Strip Ceilings, Type C84
Item 1 approx. .....m² dobner aluminium strip ceiling, Type C84 (round edges), module size 100 mm. Strip with 84 mm, joint 16 mm, 0.5 mm thick, 16 mm high, visible face matt white (similar to RAL 9010), stove-enamelled, rear side coated with protective paint.
Special colours on request

Supplier: Dobner Construction Ltd, Grenzweg 7, 03246 Crinitz, Germany
Phone +49 (0) 30/421 98 130, Fax +49 (0) 030/421 98 135
Top-hat-shaped steel mounting rails, 36 mm high, 0.5 mm thick, galvanised and black stove-enamelled (alternatively aluminium mounting rails 0.8 mm thick) are suspended from the structural soffit by means of suspension rods and quick-action suspension fixtures. Suspension height: ....... cm.
The spacing between mounting rails is max. 1.20 m, and the spacing between suspension fictures is max. 1.50 m.

The furring must be perfectly aligned.

The punched recesses in the mounting rails then serve to accommodate the strips.

Alternatively:
dobner aluminium strip ceiling, Type CP 84, (round edges), module size 100 mm, strip width 84 mm, joint 16 mm, 0.5 mm thick, 16 mm high, visible face matt white stove-enamelled, rear side coated with protective paint. The strips are additionally perforated to improve sound absorption, hole diameter 2 mm, hole spacing 5 mm, free cross-section 16%.
Item 2 approx. .....m²

 Sound-absorbing covering made of ....... mm thick mineral wool mats, visible face with black tissue.
Item 3 approx. .....m run

 Wall junctions, provision of the above with aluminium wall angle edge sections, dimensions 24 x 24 mm, material thickness 0.6 mm, stove-enamelled in colour to match strips.
Item 4 approx. .....ea.

 Installation and mounting of the strip light fittings (ceiling luminaires) to be provided by the Owner (connection by electrical installation company). See construction drawing for light fitting distribution.
 


Dobner - Metal Ceilings, Metal Ceiling Systems